BIOS Setup Information 3-5
3.3.5 Memory Test
The notebook can test main memory for errors when you turn it on. The default setting,
[Disabled], allows the notebook to bypass the memory test and speed up the self-test
procedure.
3.3.6 Boot Display
If you connect an external monitor, you can switch display between the LCD and the external
display. This parameter determines which display device the notebook uses on boot-up. Table 3-
1 describes the different settings.
If notebook resolution is set at 640x480, the image on the
notebook and external monitor will not be full-screen. For full-
screen image, set-up notebook at 800x600 resolution.
Table 3-1 Display Device Settings
Setting Description
Auto (default) If an external display is present, the notebook uses the external
display; otherwise, the LCD is the display device.
Both The notebook uses the external display and LCD simultaneously.
3.3.7 Quiet Boot
In Quiet Boot mode, the notebook does not display POST messages on your display. The default
setting is [Enabled].