4-4Service Guide

4.1.3 Disassembly Sequence

The disassembly procedure described in this manual is divided into four major sections:
Section 4.2: Replacing Memory Section 4.3: Removing the hard disk drive Section 4.4: Removing the keyboard Section 4.5: Disassembling the inside frame assembly Section 4.6: Disassembling the display
The following table lists the components that need to be removed during servicing. For example,
if you want to remove the motherboard, you must first remove the keyboard, then disassemble the
inside assembly frame in that order.
Table 4-1 Guide to Disassembly Sequence
Service Item Prerequisite
Remove or replace the hard disk drive 1. Remove HDD Door.
Remove or replace the internal module 1. Remove the keyboard.
2. Disassemble the housing
Remove the motherboard for service or
replacement 1. Remove the keyboard.
2. Disassemble the housing.
Remove the touchpad 1. Remove the keyboard
2. Disassemble the housing
Replace the LCD Remove the display
Install CPU Remove the keyboard (and heat sink assembly)
Install additional memory Remove DIMM cover
The flowchart on the succeeding page gives a clearer and more graphic representation on the
entire disassembly sequence. Please refer to it from time to time.