2-34 Service Guide
Table 2-4 M7101 Pin Descriptions (Continued)
Name No. Type Description
Power Pins
VDD5 x 3 11,59,76 P5V VDD input
VDD3 x 2 26,100 P3.3V VDD input
VDDS x 1 46 P5V Suspend VDD input. This pin supplies to RI, RTC, HOTKEYJ,
COVSW, SUSTATE, PWGD, SUSRSTJ pad.
VSS x 5 1,19,38,
63,90 PVSS Ground.

2.4.4 Different Pin definition setting

SLED, CCFT, DISPLAY, SPKCTL, SQWO and GPIOC2 pins are all internal pull high 50K
ohms. The blank part of following table means keeping the original pin definition.
When SLED default is pulled high, the chip will be in normal mode. When SLED is pulled low by 4.7K resistor, the chip will be in test mode. When GPIOC2 pull low, the PCI ports are 0078/007A and offset 0F6h D15 will be set, otherwise,
0178/017A.
Table 2-5 M7101 Different Pin Definition Setting
Original pin
definition CCFT
pull low 4.7K
DISPLAY
pull low 4.7K
SPKCTL
pull low 4.7K
SQWO
pull low 4.7K
offset 0F6h D1=1 offset 0F6h D2=1 offset 0F6h D3=1 offset 0F6h D4=1
GPIOA5 GPIOWB
GPIOA4 GPIORBJ
GPIOA1 GPIOWA
GPIOA0 GPIORAJ
GPIOB7 STPCLKJ
GPIOB6 AMSTATJ
GPIOB5 OUT_INIT
GPIOB4 OUT_INTR
GPIOB3 IN_BRDYJ
GPIOB2 IN_INIT
GPIOB1 IN_SMIJ
GPIOB0 IN_INTR
GPIOC2 BIOSA17
GPIOC1 BIOSA16
GPIOC0 ISA16