Acer G320 Series manual Removing a Dimm, Installing a Dimm

39

Removing a DIMM

Before you can install a new DIMM in a socket, remove first any previously installed DIMM from that socket.

Important: Before removing any DIMM from the mainboard, make sure to create a backup file of all important data.

1Observe the ESD precautions and pre-installation instructions described on page 25.

2Locate the DIMM sockets on the mainboard.

3Press the holding clips on both sides of the socket outward to release the DIMM (1).

4Gently pull the DIMM upward to remove it from the socket (2).

Installing a DIMM

1Observe the ESD precautions and pre-installation instructions described on page 25.

2Locate the DIMM sockets on the mainboard.

Note: For dual-channel interleave operation, a minimum of two DIMM modules must be installed and following the socket sequence: DIMM 1A and 1B first, then DIMM 2A and 2B.