Message | Description | |
Displayed | ||
| ||
|
| |
5th Slave Hard | The IDE/ATAPI device configured as Slave in the 5th IDE controller could not be properly | |
Disk Error | initialized by the BIOS. This message is typically displayed when the BIOS is trying to | |
| detect and configure IDE/ATAPI devices in POST. | |
|
| |
6th Master | The IDE/ATAPI device configured as Master in the 6th IDE controller could not be properly | |
Hard Disk | initialized by the BIOS. This message is typically displayed when the BIOS is trying to | |
Error | detect and configure IDE/ATAPI devices in POST. | |
|
| |
6th Slave Hard | The IDE/ATAPI device configured as Slave in the 6th IDE controller could not be properly | |
Disk Error | initialized by the BIOS. This message is typically displayed when the BIOS is trying to | |
| detect and configure IDE/ATAPI devices in POST. | |
|
| |
Primary | The IDE/ATAPI device configured as Primary Master failed an ATAPI compatibility test. | |
Master Drive - | This message is typically displayed when the BIOS is trying to detect and configure IDE/ | |
ATAPI | ATAPI devices in POST. | |
Incompatible |
| |
|
| |
Primary Slave | The IDE/ATAPI device configured as Primary Slave failed an ATAPI compatibility test. This | |
Drive - ATAPI | message is typically displayed when the BIOS is trying to detect and configure IDE/ATAPI | |
Incompatible | devices in POST. | |
|
| |
Secondary | The IDE/ATAPI device configured as Secondary Master failed an ATAPI compatibility test. | |
Master Drive - | This message is typically displayed when the BIOS is trying to detect and configure IDE/ | |
ATAPI | ATAPI devices in POST. | |
Incompatible |
| |
|
| |
Secondary | The IDE/ATAPI device configured as Secondary Slave failed an ATAPI compatibility test. | |
Slave Drive - | This message is typically displayed when the BIOS is trying to detect and configure IDE/ | |
ATAPI | ATAPI devices in POST. | |
Incompatible |
| |
|
| |
3rd Master | The IDE/ATAPI device configured as Master in the 3rd IDE controller failed an ATAPI | |
Drive - ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
| |
3rd Slave | The IDE/ATAPI device configured as Slave in the 3rd IDE controller failed an ATAPI | |
Drive - ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
| |
4th Master | The IDE/ATAPI device configured as Master in the 4th IDE controller failed an ATAPI | |
Drive - ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
| |
4th Slave Drive | The IDE/ATAPI device configured as Slave in the 4th IDE controller failed an ATAPI | |
- ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
| |
5th Master | The IDE/ATAPI device configured as Master in the 5th IDE controller failed an ATAPI | |
Drive - ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
| |
5th Slave Drive | The IDE/ATAPI device configured as Slave in the 5th IDE controller failed an ATAPI | |
- ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
| |
6th Master | The IDE/ATAPI device configured as Master in the 6th IDE controller failed an ATAPI | |
Drive - ATAPI | compatibility test. This message is typically displayed when the BIOS is trying to detect and | |
Incompatible | configure IDE/ATAPI devices in POST. | |
|
|
Chapter 4 | 48 |
