Step 9:Specify Volume Size then press "next".
Picture8
Step 10:Press "next" to finish setup and start create RAID0.
Picture9
Step 11:It may takes half and hours to create RAID0.After create completely,it will ask to reboot to finish create RAID0.
Step 1:Install WIN7 OS with one SATA HDD.
Step 2:Shut down the system,then add another Serial ATA hard drive in the system. Step 3:Boot to OS desktop, open the Intel® Matrix Storage Console.
Step 4:Click on the by‘Create RAID Volume from Existing HDD Drive ’ to create a RAID volume. Step 5:Click "Next" at create a RAID volume window.
Chapter 7 | 84 |
