USB eModule Error Messages
| Message | Description |
| Displayed | |
|
| |
|
|
|
| Warning! | This message is displayed when a |
| Unsupported | by the BIOS. |
| USB device |
|
| found and |
|
| disabled! |
|
|
|
|
| Warning! Port | This message is displayed to indicate that port 60h/64h emulation mode cannot be enabled |
| 60h/64h | for this USB host controller. This condition occurs if USB KBC emulation option is set for |
| emulation is | |
| not supported |
|
| by this USB |
|
| Host |
|
| Controller! |
|
|
|
|
| Warning! EHCI | This message is displayed to indicate that EHCI controller is disabled because of incorrect |
| controller | data structure. This condition occur if the USB host controller needs |
| disabled. It | while the USB is ported with |
| requires 64bit |
|
| data support in |
|
| the BIOS. |
|
|
|
|
SMBIOS eModule Error Messages | ||
| Message Displayed | Description |
|
|
|
| Not enough space in Runtime area!!. SMBIOS data | This message is displayed when the size of the |
| will not be available. | SMBIOS data exceeds the available SMBIOS |
|
| runtime storage size |
|
|
|
CPU eModule Error Messages |
| |
| Message Displayed | Description |
|
|
|
| Warning! This system board does not support the | This message is displayed when the power |
| power requirements of the installed processor. The | requirements of the board do not match the power |
| processor will be run at a reduced frequency, which | requirement of the CPU. |
| will impact system performance. area!!. SMBIOS |
|
| data will not be available. |
|
|
|
|
MPS Table | ||
Message Displayed | Description |
|
|
Insufficient Runtime space for MPS data! System | This message is displayed when there is not enough |
may operate in PIC or | space in the 0F000h runtime area for creating MPS |
| table. |
|
|
Chapter 4 | 52 |
