Chapter 3
System Disassembly
This chapter contains
Disassembly Requirements
To disassemble the computer, you need the following tools:
•Wrist grounding strap and conductive mat for preventing electrostatic discharge
•
•Philips screwdriver
•Hex screwdriver
•Plastic
•Plastic tweezers
NOTE: The screws for the different components vary in size. During the disassembly process, group the screws with the corresponding components to avoid mismatch when putting back the components.
NOTE: The disassembling instruction below is based on an X3810 sample. You will see a slightly difference between an actual X3910 system and some images hereafter.
Chapter 3 | 27 |
