XACPI Configuration, Fan Speed Control Modes | Acnodes RMC 7132

Fan Speed Control Modes

RMC 7132

1U Rackmount System

Fan Speed Control Modes

This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase, and vice versa. Select Workstation if your system is used as a Worksta- tion. Select Server if your system is used as a Server. Select "Disabled, (Full Speed @12V)" to dis- able the fan speed control function and allow the onboard fans to constantly run at the full speed (12V). The Options are: Disabled, 4-pin (Server), 4-pin (Super Quiet) and 4-pin (Workstation).

Fan1 ~ Fan 5 Reading

This feature displays the fan speed readings from fan interfaces Fan1 through Fan5. Vcore, 3.3Vcc, 12V, V_DIMM, 5V, -12V, 3.3VSB, and VBAT

XACPI Configuration

Use this feature to configure Advanced Configuration and Power Interface (ACPI) power management settings for your system.

USB Device WakeUp

This feature is used to awaken from Standby mode by a Universal Serial Bus (USB) device (such as, a USB mouse or USB keyboard). The options are Enabled and Disabled.

PS/2 KB/MS WakeUp

This feature is used to awaken from Standby mode by a PS/2 mouse or PS/2 keyboard. The options are Enabled and Disabled.

ACPI Aware O/S

Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System. Otherwise, disable this feature. The options are Yes and No.

Headless Mode

This feature is used to enable system to function without a keyboard, monitor or mouse attached The options are Enabled and Disabled.

ACPI Version Features

The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further expla- nation: http://www.acpi.info/

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.

Image 85

Acnodes RMC 7132 XACPI Configuration, Fan Speed Control Modes, Fan1 ~ Fan 5 Reading, USB Device WakeUp, PS/2 KB/MS WakeUp

Contents

All rights reserved. Product description and product specifications 1U Rackmount SystemUser Manual RMC7132 1U Rackmount Computer comes with Manual Revision Release Date April 26 Chapter 4 System Safety Chapter 2 Server InstallationPreface Manual Organization Chapter 6 Advanced Chassis Setup Chapter 5 Advanced Motherboard SetupChapter 7 BIOS Appendix A POST Error Beep Codes Appendix B Installing the Windows OS CHAPTER 1 INTRODUCTION CHAPTER 2 INSTALLATIONTable of Contents 1-3 Server Chassis Features CHAPTER 5 ADVANCED MOTHERBOARD SETUP CHAPTER 4 SYSTEM SAFETYCHAPTER 3 System Interface 2-6 Checking the Drive Bay Setup 5-6 Installing Memory Modules 5-5 Installing the Processor and Heatsink5-7 Adding PCI Expansion Cards Serial Ports CHAPTER 7 BIOS CHAPTER 6 ADVANCED CHASSIS SETUP Appendix C System Specifications Appendix A POST Error Beep Codes Appendix B Installing the Windows OS 1.1 Overview CHAPTER 1 INTRODUCTION Other Features 1-2 Motherboard FeaturesProcessor Memory 1U Rackmount System System Power 1-3 Server Chassis FeaturesSATA Subsystem Control Panel Choosing a Setup Location CHAPTER 2 INSTALLATION2-3 Preparing for Setup 2-1 Overview Server Precautions Rack Precautions Ambient Operating Temperature Rack Mounting ConsiderationsReduced Airflow Mechanical Loading Identifying the Sections of the Rack Rails 2-4 Installing the System into a Rack Installing the Rack Rails Installing the Chassis Rails Installing the Server into the Rack Installing the Server into a Telco Rack Checking the Components 2-5 Checking the Motherboard Setup 1U Rackmount System Providing Power 2-6 Checking the Drive Bay SetupChecking the Drives Checking the Airflow Power Reset ButtonCHAPTER 3 SYSTEM INTERFACE 3-1 Overview Overheat 3-4 Serial ATA Drive Carrier LEDs 4-1 Electrical Safety Precautions CHAPTER 4 SYSTEM SAFETY 4-2 General Safety Precautions 4-3 ESD Precautions 4-4 Operating Precautions Precautions CHAPTER ADVANCED MOTHERBOARD SETUP5-1 Handling the Motherboard Installing to the Chassis 5-2 Serverboard InstallationUnpacking Connecting Data Cables 5-3 Connecting CablesConnecting Power Cables Connecting the Control Panel 5-4 I/O Ports Installing an LGA1366 Processor 5-5 Installing the Processor and Heatsink 6. Use your thumb to gently push the socket clip down to the clip lock Installing a Passive CPU Heatsink Removing the Heatsink Installing & Removing DIMMs 5-6 Installing Memory ModulesTo Install To Remove Maximum Memory Possible Memory Support 5-7 PCI Expansion Cards Installing a PCI Expansion Card 5-8 Serverboard Details 1U Rackmount System Main ATX Power Supply Connector 5-9 Connector DefinitionsProcessor Power Connector Power Button Power On LED HDD LED/UID SwitchOverheat/Fan Fail/UID LED NIC2 LAN2 LED Fan Headers NMI ButtonATX PS/2 Keyboard and PS/2 Mouse Ports Serial Ports Chassis Intrusion Onboard Power LEDWake-On-LAN External Speaker/Internal Buzzer Universal Serial Bus USB Power Supply SMBus HeaderSGPIO Headers LAN1/2 Ethernet Ports Alarm Reset Power Supply Fail LED HeaderI-Button Unit Identifier Button VGA Enable/Disable 5-10 Jumper SettingsExplanation of Jumpers CMOS Clear Watch Dog Enable/Disable LAN1/2 Enable/DisableUSB Wake-Up BMC Enable/Disable 5-11 Onboard IndicatorsSMBus to PCI Slots LAN1/2 LEDs 1U Rackmount System All rights reserved. Product description and product specificationsCopyright 2005 Acnodes, Inc 661 Brea Canyon Rd., Suite 1U Rackmount System Driver/Tool Installation Display Screen 5-13 Installing Software Doctor 1U Rackmount System 6-1 Static-Sensitive Devices CHAPTER 6 ADVANCED CHASSIS SETUPTools Required 6-2 Control Panel System Fan Failure 6-3 System FansReplacing System Cooling Fans Accessing the Drive Bays 6-4 Drive Bay Installation/RemovalSATA Drive Installation Mounting a SATA Drive in a Drive Carrier Installing/Removing SATA Drives DVD-ROM Drive Installation SATA Power CablesInstalling a DVD-ROM Drive Power Supply Failure 6-5 Power SupplyReplacing the Power Supply Starting BIOS Setup Utility CHAPTER 7 BIOSHow To Change the Configuration Data 7-1 Introduction Starting the Setup Utility 7-2 Main Setup System Memory System Time/System DateSystem Overview The following BIOS information will be displayed XBIOS Features Quick Boot 7-3 Advanced Setup ConfigurationsQuiet Boot Bootup Num-Lock Power Button Function Wait For F1 If ErrorRestore on AC Power Loss PS/2 Mouse Support Hardware Prefetcher Available when supported by the CPU Ratio CMOS SettingAdjacent Cache Line Prefetch Available when supported by the CPU XProcessor & Clock Options Simultaneous Multi-Threading Available when supported by the CPU Intel Virtualization Technology Available when supported by the CPUIntel TurboMode Tech Available if Intel EIST technology is Enabled Intel EIST Technology 1 - Core Ratio Limit Intel Turbo Boost Configuration Turbo Ratio Limit Program2 ~ 3 - Core Ratio Limit TDC Limit Override XAdvanced Chipset Control C-State package limit settingC-STATE Tech C1 Auto Demotion Memory Frequency QPI L0s and L1Memory Mode Demand Scrubbing Inlet Temperature High Performance Event TimerTemperature Rise Air Flow Intel VT-d Active State Power ManagementIntel I/OAT USB Functions SATA#1 Configuration XIDE / Floppy ConfigurationConfigure SATA#1 as IDE Detect Timeout sec LBA/Large Mode TypeBlock Multi-Sector Transfer PIO Mode S.M.A.R.T. For Hard disk drives DMA Mode32Bit Data Transfer PCI Latency Timer XPCI/PnP ConfigurationClear NVRAM Plug & Play OS XRemote Access Configuration XSuper IO Device ConfigurationRemote Access Serial Port1 Address/ Serial Port2 Address Redirection After BIOS POST XHardware Health ConfigurationCPU Overheat Alarm Terminal Type System Temperature CPU TemperatureThe item displays the absolute temperature as detected by the BIOS ACPI Version Features XACPI ConfigurationFan Speed Control Modes Fan1 ~ Fan 5 Reading Execute TPM Command XIPMI ConfigurationTPM Enable/Disable Status XTrusted Computing Set PEF Configuration Set LAN ConfigurationClear BMC System Event Log BMC Watch Dog Timer Action XEvent Log ConfigurationBMC WatchDog TimeOut MinSec View Event Log Supervisor Password 7-4 Security SettingsUser Password Change Supervisor Password Boot Sector Virus Protection Change User Password XBoot Device Priority 7-5 Boot SettingsXHard Disk Drives XRemovable Drives 7-6 Exit OptionsXCD/DVD Drives Save Changes and Exit Load Fail-Safe Defaults Load Optimal DefaultsDiscard Changes and Exit Discard Changes Recoverable POST Error Beep Codes Appendix A POST Error Beep Codes B-1 Installing Windows on RAID Systems Appendix B Installing the Windows OS B-2 Installing Windows on Non-RAID Systems BIOS Appendix C SpecificationsProcessors Chipset Power Supply WeightSystem Input Requirements Operating Environment