Acnodes RMC 7132 user manual Installing a Passive CPU Heatsink, 1U Rackmount System

RMC 7132

1U Rackmount System

Installing a Passive CPU Heatsink

Notes: The motherboard comes with a heatsink bracket pre-in- stalled on the reverse side of the board. Do not apply any thermal grease to the heatsink or the CPU die; the required amount has al- ready been applied.

1. Place the heatsink on top

of the CPU so that the four mounting holes are aligned with those on the retention mechanism.

2.Install two diagonal screws (i.e. the #1 and the #2

screws) and tighten them until just snug (do not fully tighten the screws to avoid damaging the CPU.)

3.Repeat step 2 with the #3

and #4 screws. Make sure all screws are snug.

	© Copyright 2005 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.