Acnodes RMC 7132 Mounting a SATA Drive in a Drive Carrier, Installing/Removing SATA Drives

RMC 7132

1U Rackmount System

Mounting a SATA Drive in a Drive Carrier

1.Install a drive into the carrier with the printed circuit board side toward the carrier so that the Mounting holes align with those in the carrier.

2.Secure the drive to the carrier with four screws, as shown in Figure 6-3.

Installing/Removing SATA Drives

1.To remove, first push the release button located beside the drive LEDs

2.Swing the colored handle fully out and use it to pull the unit straight out (see Figure 6-4).

3.To install, simply push the drive carrier into its bay until fully seated.

	© Copyright 2009 Acnodes, Inc.
661 Brea Canyon Rd., Suite 3	All rights reserved. Product description and product specifications
Walnut, CA 91789	are subject to change without notice. For latest product information,
tel: 909.598.7388, fax: 909.598.0218	please visit Acnodes’ web site at www.acnodes.com.