Acnodes RMC 7150

14628 Central Blvd,

Chino, CA91710

tel:909.597.7588, fax:909. 597.1939

are sub ject to c hange without not ice. For latest product in formation,

please visit Acnode s’ we b si te a t ww w.acnodes. com.

RMC 7150

14” short depth rack server

XRemote Access Configuration

Remote Access

This allows the user to enable the Remote Access feature. The options are Disabled and Enabled. If Remote Access is set to

Enabled, the following items will display:

Serial Port Number

This feature allows the user decide which serial port to be used for Console Redi- rection. The options are COM 1 and COM 2.

Base Address, IRQ

This item displays the based address and IRQ of the serial port specified above. The options are COM 1 and COM 2.

Serial Port Mode

This feature allows the user to set the serial port mode for Console Redirection. The options are 115200 8, n 1; 57600 8, n, 1;

38400 8, n, 1; 19200 8, n, 1; and 9600 8, n, 1.

Flow Control

This feature allows the user to set the flow control for Console Redirection. The options are None, Hardware, and Software.

Redirection After BIOS POST

Select Disabled to turn off Console Redirection after Power-On Self-Test (POST). Select Always to keep Console Redirection

active all the time after POST. (Note: This setting may not be supported by some operating systems.) Select Boot Loader to

keep Console Redirection active during POST and Boot Loader. The options are Disabled, Boot Loader, and Always.

Terminal Type

This feature allows the user to select the target terminal type for Console Redirec- tion. The options are ANSI, VT100, and VT-

UTF8.

VT-UTF8 Combo Key Support

A terminal keyboard definition that provides a way to send commands from a remote console. Available options are Enabled

and Disabled.

Sredir Memory Display Delay

This feature defines the length of time in seconds to display memory information. The options are No Delay, Delay 1 Sec,

Delay 2 Sec, and Delay 4 Sec.

XHardware Health Monitor

This feature allows the user to monitor system health and review the status of each item as displayed.

CPU Overheat Alarm

This option allows the user to select the CPU Overheat Alarm setting which de- termines when the CPU OH alarm will be

activated to provide warning of possible CPU overheat.

Warning! 1.Any temperature that exceeds the CPU threshold tempera- ture predefined by the CPU manufacturer may result in

CPU overheat or system instability. When the CPU temperature reaches this predefined threshold, the CPU and system

cooling fans will run at full speed. 2. To avoid possible system overheating, please be sure to provide adequate airflow to your

system.