14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909. 597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are sub ject to c hange without not ice. For latest product in formation,
please visit Acnode s’ we b si te a t ww w.acnodes. com.
RMC 7150
14” short depth rack server
57
System Temperature: The system temperature will be displayed (in degrees in Celsius and Fahrenheit) as it is detected by the
BIOS.
Fan Speed Readings
This feature displays the fan speed readings from Fan1 through Fan8.
Fan Speed Control Modes
This feature allows the user to decide how the system controls the speeds of the onboard fans. The CPU temperature and the
fan speed are correlative. When the CPU on-die temperature increases, the fan speed will also increase, and vice versa. Select
Workstation if your system is used as a Workstation. Select Server if your system is used as a Server. Select Disabled to
disable the fan speed control function and allow the onboard fans to constantly run at full speed. The Options are:
Disabled, 4-pin (Server), 4-pin (Workstation), 4-pin (Quiet), 4-pin (Super Quiet).
Voltage Readings
The following voltage readings will be displayed.
CPU0 Vcore, CPU1 Vcore, 1.5V, 5V, 5VSB, 12V, -12V, 3.3Vcc, 3.3VSB, VBAT and Vtt
XACPI Configuration
Use this feature to configure Advanced Configuration and Power Interface (ACPI) power management settings for your system.
High Performance Event Timer
Select Enabled to activate the High Performance Event Timer (HPET) that produces periodic interrupts at a much higher
frequency than a Real-time Clock (RTC) does in synchronizing multimedia streams, providing smooth playback and reducing
the de- pendency on other timestamp calculation devices, such as an x86 RDTSC Instruc- tion embedded in the CPU. The
High Performance Event Timer is used to replace the 8254 Programmable Interval Timer. The options are Enabled and Disabled.
USB Device Wakeup
Select Enable to "wake-up" the system via a USB device when the system is in S3 or S4 State. The options are Enabled and
Disabled.
PS2 KB/MS Wake Up
Select Enable to "wake-up" the system using either the PS2 keyboard or mouse (if equipped) when the system is in S3 (Sleep)
or S4 (Hibernate) state. The options are Enabled and Disabled.
ACPI Aware O/S
Enable ACPI support if it is supported by the OS to control ACPI through the Operat- ing System. Otherwise, disable this
feature. The options are Yes and No.
ACPI APIC Support
Select Enabled to include the ACPI APIC Table Pointer in the RSDT (Root System Description Table) pointer list. The options
are Enabled and Disabled.
APIC ACPI SCI IRQ
When this item is set to Enabled, APIC ACPI SCI IRQ is supported by the system. The options are Enabled and Disabled.