Chapter 4 Using the Web Administrator
7.In next Wizard screen, the user can configure the Print Server to automatically get its IP address from the network’s DHCP server, or manually specify a static IP address. To configure the Print Server to automatically get an IP address from the network’s DHCP server, activate “Enable Obtain TCP/IP settings automatically.” To manual assign an IP address, activate “Disable Use the fol- lowing TCP/IP settings” then enter “IP Address,” “Subnet Mask,” and “Gateway” addresses for the Print Server. Also, the Print Server’s DHCP server can be enabled or disabled from this screen. When finished, click Save & Next.
8.In next Wizard screen, the SMB settings of the Print Server can be changed. When finished, click Save & Next.
47
