Actiontec electronic 802PSG user manual Dhcp Server

Actiontec 54 Mbps Wireless Multiport Print Server User Manual

DHCP Server:

This window allows the user to configure the Print Server to automatically get its IP address from the network’s DHCP server, or manually specify a static print server IP address. The Print Server also has a built-in DHCP server that manages the Print Server IP addresses.

IP

Select IP to change the Print Server’s IP address settings. To configure the print server to automatically get an IP address from the network’s DHCP server, acti- vate “Auto IP.” To manual assign an IP address, activate “Specify IP” then enter “IP Address,” “Subnet Mask,” and “Gateway” addresses for the Print Server.

DHCP Server

Select DHCP Server to change the Print Server’s DHCP settings. Activate “Enable” or “Disable” to start up or turn off the the Print Server’s DHCP server (Disable is activated by default). If enabling the DHCP server, enter a “Start Address,” “End Address,” “Gateway,” and “DNS.” The Print Server will then assign a unique IP address (within the defined subnet) for each client.

Save/Cancel

After making changes in the TCP/IP window, click Save to save them. Click Cancel to discard any changes made.

22