18
Actiontec DSL Modem User Manual
19
Chapter 4 Setting Up Static IP
5. Scroll down to the “IP Configuration” section on the Actiontec DSL Modem
Setup Page screen, click on the circle next to “Static,” and enter the IP address
obtained from the ISP worksheet in the IP text box.
☞ Note: The “Subnet” and “Gateway” text boxes are not used dur-
ing this procedure.
6. If provided with DNS settings on the ISP worksheet, click the circle next to
“Static” and enter the DNS addresses in the “DNS Configuration” section at the
bottom of the Actiontec DSL Modem Setup Page screen.
If no DNS settings were provided, go to step 7.
7. Click “Save and Restart” at the bottom of the screen.
8. The “Save and Restart” page appears. Click “Save and Restart” to save the set-
tings changed in the Actiontec DSL Modem Setup Page screen.