2 Before You Begin
Windows NT 4.0
To ensure the computer is configured to use the Modem, the PCMCIA and COM 2 settings must be properly configured.
PCMCIA Settings
1.After booting up the computer, select Start, Settings, then Control Panel.
2.In the “Control Panel” window,
3.The “Devices” window appears. In the list box, scroll down and click Pcmcia once to highlight. If the PCMCIA device is set correctly, “Started” and “Boot” should appear in the “Status” and “Startup”columns, respectively.
4.If the PCMCIA device is not set to Boot and Started, click Startup, select Boot in the “Device” window, then click OK.
5.Close the “Devices” window and restart the computer.
6
