DataLink V.90 PCMCIA Fax Modem
Windows 95 and 98
If the Modem is the first PC Card purchased for the notebook computer, ensure the computer’s PCMCIA controller has been initialized and properly configured for Windows 95 and 98 by following these instructions:
1.After booting up the computer, select Start, Settings, then Control Panel.
2.In the “Control Panel” window,
If the “New Hardware Found” window appears, the computer’s PCMCIA ports have not been configured. Follow the installation instructions in the window, and refer to the computer’s documentation for more information.
The computer is configured to use the Modem. Next, go to chpater 3, “Installing the Modem,” to continue installing and configuring the Modem.
5
