Alarm Setting, Alarm PIN, Alarm Switch | ACTiSYS CAM-6500 manual

B-3-12 ALARM SETTING

The integrated high speed dome provides eight alarm inputs and two alarm outputs (N.O. and N.C.) to connect alarm devices. With this function, dome will cooperates with alarm system to catch the event images. For wiring, please refer to the installation guide and/or qualified service personnel. Alarm parameters can be set on this page.

ALARM SETTING
ALARM PIN	1
ALARM SWITCH	OFF
ALARM TYPE	N.C.
ALARM ACTION	PRESET
PRESET POINT	001
DWELL TIME	ALWAY
EXIT	YES

♦ALARM PIN

The dome provides 8 alarm inputs and 2 outputs ( 1 x N.O. and 1 x N.C.). Select an alarm connector which you want to set its alarm-related parameters with this item, and then set its alarm-related parameters in Alarm Setting menu.

♦ALARM SWITCH

The item is used to enable or disable the selected alarm pin function.

♦ALARM TYPE

There are two kinds of alarm types: Normal Open and Normal Close, which are illustrated as below. Select an alarm type that corresponds with the alarm application.

55

Image 60

ACTiSYS CAM-6500 user manual Alarm Setting, Alarm PIN, Alarm Switch, Alarm Type

Contents

Hardware User’s Manual Copyright TrademarksLiability FCC/CE Regulation Table of Contents Page Introduction Day/Night Features Precise and Accurate Tracking Perfect Contrast Solution for High Image Quality QoS Enabled Video StreamingLow-Light Application Privacy Mask for Privacy Protection Bundle Powerful Surveillance Software Dynamic Dome ConfigurationDdns Supported Build-in Hardware Motion Detection Don’t use the power supply with other voltages Don’t open the housing of the product CleaningDamage Requiring service Attachments Safety Check Reset Button Communication Switch Setting Dome ID Setting Dome Control Protocol Pin Connector for LAN/WAN Pin Connector Mounting the IP High Speed Dome Basic Connections Optional Accessories Surface Ceiling MountIn-Ceiling Mount Ceiling Panel Transparent Cover/Smoke CoverIndoor Mount Kit Gooseneck Tube Straight TubeCorner Standard Mounting Plate Pole Thin Direct Mounting Pole Wide Direct Mounting Corner Thin Box Corner Wide Box Pole Thin Box Pole Wide BoxWall Box Mounting Stainless Steel Straps Stainless Strap CutterRepeater/Converter Connector Box Indoor Application Power BoxPower Adapter Ceiling Mount Surface Ceiling Mounting Items NeededTools Needed Drill these holes on the surface ceiling Ceiling Panel for In-ceiling Mounting In-ceiling Mounting Step Put up the T-Bar into the ceiling hole Step Ceiling Mount with Straight Tube Wall Mount Wall Mounting with Gooseneck Tble Wall Box Mounting Corner Mount Corner Standard Mounting Plate Corner Thin/Wide Box Mounting Pole Mount Pole Thin/Wide Direct Mounting Pole Thin/Wide Box Mounting OSD Setup Menu OSD Display Format¾ 18x Model Camera Backlight Home Cruise ¾ 22x Model / 23x Model Schedule Manual Aperture Enter Exit YES Sequence Line WDR Configuration Menu Default Camera Backlight Focus ¾ 18x Model AutoManual ¾ 22x Model / 23x Model Auto AE Mode ApertureAuto Bright ShutterGain Iris WBC Mode AGCIndoor Outdoor ATWID Display Setup Menu OFF18x Model 22x Model / 23x Model Image Zoom SpeedSpeed by Zoom Auto Calibration Digital ZoomSlow Shutter Angle Adjuster ResetSetup MENU2 18x Model Only ¾ 23x Model Mask Display FirstLast Title Display Title Setting Title ABC Alarm Setting Alarm PINAlarm Switch Alarm Type Alarm Action PresetHome Setting Sequence Select Mode Home FunctionReturn Time Preset Position SeqenceSequence Line Sequence Point Dwell Time RUN Sequence Autopan Line Start PointEND Point Direction RUN Autopan Record Start Record ENDRUN Cruise IR Function Removable IR Cut Alarm Detect 18x Model Only Detect SwitchThreshold IR Colour Detect Mode INT. FocusFIX Focus INT. AE WDR Switch WDR FunctionPrivacy Privacy Switch TransparencyColour SET Mask Size 00 ~ Shade Mask CLEAR+RESET CENTER000 ~SIZE000 ~ Time Function Time DisplayYear / Month / DAY Hour / Minute Schedule Switch Schedule ModeSchedule Point Schedule Hour / Minute