Surface Ceiling Mounting, Items Needed | ACTiSYS CAM-6500 instruction

A-3: Surface Ceiling Mounting

Surface Ceiling Mounting is a standard installation for an indoor dome, and general mounting accessories are equipped in the standard indoor dome camera package. Here lists the items and tools needed to mount the dome camera onto the ceilings. The supplied items are all in the speed dome camera package.

Items Needed:

9IP High Speed Dome Camera

9Surface Ceiling Mount and Decoration Right

9Fixing Plate

Tools Needed:

9Tool for drilling

9(+,-) Screw Driver

Follow the steps to install the IP high speed dome camera for surface ceilings.

STEP 1

Screw the Fixing Plate to your Dome Body.

STEP 2

Unpack the dome package and take out the Decoration Ring. Remove the Surface Ceiling Mount from the Decoration Ring.

21

Image 26

ACTiSYS CAM-6500 user manual Surface Ceiling Mounting, Items Needed, Tools Needed

Contents

Hardware User’s Manual Liability CopyrightTrademarks FCC/CE Regulation Table of Contents Page Introduction Day/Night Features Precise and Accurate Tracking Low-Light Application Perfect Contrast Solution for High Image QualityQoS Enabled Video Streaming Privacy Mask for Privacy Protection Ddns Supported Bundle Powerful Surveillance SoftwareDynamic Dome Configuration Build-in Hardware Motion Detection Damage Requiring service Don’t use the power supply with other voltagesDon’t open the housing of the product Cleaning Attachments Safety Check Reset Button Communication Switch Setting Dome ID Setting Dome Control Protocol Pin Connector for LAN/WAN Pin Connector Mounting the IP High Speed Dome Basic Connections In-Ceiling Mount Optional AccessoriesSurface Ceiling Mount Indoor Mount Kit Ceiling PanelTransparent Cover/Smoke Cover Corner Standard Mounting Plate Gooseneck TubeStraight Tube Pole Thin Direct Mounting Pole Wide Direct Mounting Corner Thin Box Corner Wide Box Wall Box Mounting Pole Thin BoxPole Wide Box Repeater/Converter Stainless Steel StrapsStainless Strap Cutter Power Adapter Connector Box Indoor ApplicationPower Box Ceiling Mount Tools Needed Surface Ceiling MountingItems Needed Drill these holes on the surface ceiling Ceiling Panel for In-ceiling Mounting In-ceiling Mounting Step Put up the T-Bar into the ceiling hole Step Ceiling Mount with Straight Tube Wall Mount Wall Mounting with Gooseneck Tble Wall Box Mounting Corner Mount Corner Standard Mounting Plate Corner Thin/Wide Box Mounting Pole Mount Pole Thin/Wide Direct Mounting Pole Thin/Wide Box Mounting ¾ 18x Model OSD Setup MenuOSD Display Format Camera Backlight Home Cruise ¾ 22x Model / 23x Model Schedule Manual Aperture Enter Exit YES Sequence Line WDR Configuration Menu Default Camera Backlight Manual Focus¾ 18x Model Auto ¾ 22x Model / 23x Model Auto Auto AE ModeAperture Gain BrightShutter Iris Indoor WBC ModeAGC ID Display OutdoorATW 18x Model Setup MenuOFF 22x Model / 23x Model Speed by Zoom ImageZoom Speed Slow Shutter Auto CalibrationDigital Zoom Setup MENU2 18x Model Only Angle AdjusterReset ¾ 23x Model Last Mask DisplayFirst Title Display Title Setting Title ABC Alarm Switch Alarm SettingAlarm PIN Alarm Type Home Setting Alarm ActionPreset Sequence Return Time Select ModeHome Function Sequence Line Preset PositionSeqence Sequence Point Dwell Time RUN Sequence END Point Autopan LineStart Point Direction RUN Autopan RUN Cruise Record StartRecord END IR Function Removable IR Cut Threshold Alarm Detect 18x Model OnlyDetect Switch IR Colour FIX Focus Detect ModeINT. Focus INT. AE Privacy WDR SwitchWDR Function Colour Privacy SwitchTransparency SET Mask Size 00 ~ Shade SIZE000 ~ Mask CLEAR+RESETCENTER000 ~ Year / Month / DAY Time FunctionTime Display Hour / Minute Schedule Point Schedule SwitchSchedule Mode Schedule Hour / Minute