Manuals / Uniden / Communications / Cordless Telephone

Uniden EXI 7926 manual Maintenance, Battery replacement and handling, When slightly dirty

Models: EXI 7926

1 46

Download 46 pages 4.81 Kb

Page 42

Additional information

Note on power sources

Battery replacement and handling

When the operating time becomes short, even after a battery is recharged, please replace the battery.

With normal usage, your battery should last about one year.

Please contact your place of purchase for a replacement battery.

RECYCLING NICKEL-CADMIUM BATTERIES

NICKEL-CADMIUM

BATTERIES MUST BE

DISPOSED OF

PROPERLY.

Ni-Cd

Nickel-cadmium cells are used in the bat- tery pack. Please take your used nickel- cadmium battery packs to a store that recycles nickel-cadmium batteries.

Power Failure

During the period that the power is off, you will not be able to perform or receive calls with the telephone.

Caution

•Use the specified battery pack.

•Do not remove the battery from the handset to charge it.

•Never throw the battery into a fire, disassemble it, or heat it.

•Do not remove or damage the battery cover.

Maintenance

When slightly dirty

Wipe with a soft, dry cloth.

When very dirty

Use a pencil eraser that has been dampened with diluted, neutral detergent. Dry with a dry cloth.

When the charging terminals become dirty

Wipe with a pencil eraser or other contact cleaner.

Caution

Do not use paint thinner, benzene, alcohol, or another chemical product. Doing so may discolor the surface of the telephone and damage the finish.

42

Image 42

Uniden EXI 7926 manual Maintenance, Battery replacement and handling, When slightly dirty, When very dirty

Contents

Page Features IntroductionControls and functions Line239 40 41 42 43 Table of contents Read this first 11 toChecking the package contents StepSetting up the base unit Choose the best locationUsed only when second line Connect the base unitChoose the dialing mode If your dialing system is Set the switch toIf you arent sure of your dialing system Preparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solventsSetting up Caller ID options Entering your area code To selectBasic 2-line operation BasicsMaking and receiving calls Handset On Base Handset Off Base Base Only Auto Talk offAnswering a call from the base Answering a call from the handsetMaking a call from the handset Using the tone featureMaking a call from the base Off-hook dialingHandset Flash and Call WaitingLast number redial BaseUsing the speakerphone mute feature Placing a call on holdTraveling out-of-range Using the page featureAdjusting the volume controls Selecting a different channelBase speaker volume Line featuresBase ringer volume Line operationWay conferencing Conference Line 1 Line Using your EXI 7926 intercom Paging from the base to handsetPaging from the handset to base Using the speakerphone Transferring callsMemory features Storing a phone number in memoryOn the handset On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handsetFrom the base Using memory dialing At the baseScreening your calls Caller ID featuresUsing Caller ID Reviewing Caller ID name/numbersCalling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. UseDeleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbersChanging the digital security code Headset installationAdditional information Headset JackMounting the base unit on a wall Standard wall plate mountingDirect wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclipWhen slightly dirty MaintenanceBattery replacement and handling When very dirtyTroubleshooting Symptom SuggestionBase unit SpecificationsGeneral HandsetIndex W, X, Y, Z