Basics (continued)

Base ringer volume

The ringer control for the base of your EXI 7926 allows you turn the ringer OFF or to select LO/HI volume for each line 1 or line 2.

Base speaker volume

To control the speaker volume of the base, adjust the VOLUME slide switch as desired.

2-Line features

2-Line operation

The handset and the base can be used on separate telephone lines at the same time. For example, if the handset is on a call with line 1, you can make, or receive calls at the base on line 2.

The line 1 LED on the base flashes green to indicate line 1 is In Use at the handset.

When line 1 is In Use at the base the LCD screen displays the following:

line 1

line 2

 

conference

mute hold

￿

(Base)￿ Line 1

Note When you attempt to make a call, the EXI 7926 informs you if a line is currently In Use.

Extension In Use

The Extension In Use feature prevents accidental interruption of ongoing telephone conversations.

If you attempt to make a call and another phone is In Use on line 1, the handset LCD indicates an extension is In Use. (The line 1 LED at the base blinks.) If you press line 1, you will hear a beep. This warns you the line is In Use. To make your call, you must use line 2.

Notes • If you want to join a conversation on an extension currently In Use, press line 1 or line 2 twice.

The flash feature does not function when the phone is in the conference mode.

21

Page 21
Image 21
Uniden EXI 7926 manual Line features, Line operation, Base ringer volume, Base speaker volume, Extension In Use