Memory features, Storing a phone number in memory | Uniden EXI 7926

Memory features

Storing a phone number in memory

Your EXI 7926 stores up to 30 name/numbers in the handset plus 10 numbers in the base. Memory locations are shared by both lines.

On the handset

1

2

Pick up the handset from the base.

Press and hold mem for two seconds. The following screen appears:

line1	line2	Memory Store
mem		Memory Store
	01	John Smith
	02

3	Use the ¥up/int'com	and dn »/conf keys,
	or number keypad, to choose the memory
	location to store a name/number.
4	Press sel/vol . The following screen appears:
	sel/vol	chan redial/p

call id dn

up delete

hold conf int'com flash

Store Name

5 Enter a name by using the ¥up/int'com	and
the character menu. Use the * /0/tone	and
a blank space.

(The delete/flash key deletes characters as the cursor moves left.)

dn »/conf keys to scroll through #/ 1 keys right or left, or to create

call id dn

up delete

hold conf int'com flash

6 When you have finished entering a name, press sel/vol . The following screen appears.

The cursor flashes, indicating that the display is ready for a number to be entered.

Store Number

continued next page

Note Whenever you are using a menu screen, you must press a key within 20 seconds or the phone will return to standby. You may also press mem to exit a memory menu at any time.

26

Image 26

Uniden EXI 7926 manual Memory features, Storing a phone number in memory, On the handset

Contents

Page Features Introduction Controls and functions Line2 39 40 41 42 43 Table of contents Read this first 11 to Checking the package contents Step Setting up the base unit Choose the best location Used only when second line Connect the base unit If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Preparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solvents Setting up Caller ID options Entering your area code To select Basic 2-line operation BasicsMaking and receiving calls Handset On Base Handset Off Base Base Only Auto Talk off Answering a call from the base Answering a call from the handset Making a call from the handset Using the tone featureMaking a call from the base Off-hook dialing Handset Flash and Call WaitingLast number redial Base Using the speakerphone mute feature Placing a call on hold Traveling out-of-range Using the page featureAdjusting the volume controls Selecting a different channel Base speaker volume Line featuresBase ringer volume Line operation Way conferencing Conference Line 1 Line Paging from the handset to base Using your EXI 7926 intercomPaging from the base to handset Using the speakerphone Transferring calls On the handset Memory featuresStoring a phone number in memory On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handset From the base Using memory dialing At the base Screening your calls Caller ID featuresUsing Caller ID Reviewing Caller ID name/numbers Calling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. Use Deleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbers Changing the digital security code Headset installationAdditional information Headset Jack Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclip When slightly dirty MaintenanceBattery replacement and handling When very dirty Troubleshooting Symptom Suggestion Base unit SpecificationsGeneral Handset Index W, X, Y, Z