Additional information
Changing the digital security code
The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary.
The first time you charge your handset, the security code is automatically set. (See page 6.)
In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code.
1
2
Remove the handset from the base unit. | mute hold |
Press page/int'com . | status |
| |
While the handset is beeping, place the | memory page/int'com redial/p flash |
| |
handset in the base unit. |
|
The paging tone stops. Leave the handset on the base at least 3 seconds. A random, new security code is set.
Note If the handset battery pack is completely discharged, or the battery pack removed, the digital security code will be lost.
If this happens, a new security code is set automatically the next time the battery pack is charged.
Headset installation
Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert headset plug into the headset jack. Your phone is ready for
headset
jack
If you are using an optional headset, you must still use the handset keypad for phone operations.
Use only Uniden HS910 headset specifically designed for Uniden phones.
38
