Step 2 (continued)
Connect the base unit
If you want to install the base unit on the wall, see page 39.
| (Used only when second line |
Route the cord. | connects to a separate jack.) |
2
To AC outlet
To DC IN 9V
1
AC adapter (supplied)
To telephone outlet
Telephone line cord (supplied)
To TEL LINE
3
Note
1 Connect the telephone line cord to the TEL LINE jack and to a telephone outlet.
2 Connect the AC adapter to the DC IN 9V jack and to a standard 120VAC wall outlet.
3 Set base unit on a desk or tabletop and place the handset into the base unit.
Then raise the antenna to a vertical position.
Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard,
9
