Direct wall plate mounting | Uniden EXI 7926 manual

Additional information

Handset retainer	8 On the base unit, pull the handset
	retainer out of the slot. Rotate it clock-
	wise 180 degrees.

9 Flip the retainer from front to back. Slide it back into the slot so that the lip of the retainer is up and the oval is down. The retainer holds the handset in place.

Direct wall plate mounting

If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following:

•Avoid electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.

•Try to mount your phone within 10 - 15 feet of a working phone jack to avoid excessive cord lengths.

•Make sure the wall material is capable of supporting the weight of the base and handset.

TOP

3/16 in.

3-15/16 in.

1 Insert two mounting screws into the wall, (with their appropriate anchoring device), 3-15/16 inches apart. Allow about 3/16 of an inch between the wall and screwheads for mounting the phone.

2 Refer to steps 1 through 9 on page 39 to mount the telephone.

40

Image 40

Uniden EXI 7926 manual Direct wall plate mounting

Contents

Page Features Introduction Controls and functions Line2 39 40 41 42 43 Table of contents Read this first 11 to Checking the package contents Step Setting up the base unit Choose the best location Used only when second line Connect the base unit If your dialing system is Set the switch to Choose the dialing modeIf you arent sure of your dialing system Preparing the battery pack Battery use time per charge When the battery charge becomes lowCleaning the battery contacts Do not use any liquids or solvents Setting up Caller ID options Entering your area code To select Basics Making and receiving callsBasic 2-line operation Handset On Base Handset Off Base Base Only Auto Talk off Answering a call from the base Answering a call from the handset Using the tone feature Making a call from the baseMaking a call from the handset Off-hook dialing Flash and Call Waiting Last number redialHandset Base Using the speakerphone mute feature Placing a call on hold Using the page feature Adjusting the volume controlsTraveling out-of-range Selecting a different channel Line features Base ringer volumeBase speaker volume Line operation Way conferencing Conference Line 1 Line Paging from the base to handset Using your EXI 7926 intercomPaging from the handset to base Using the speakerphone Transferring calls Storing a phone number in memory Memory featuresOn the handset On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handset From the base Using memory dialing At the base Caller ID features Using Caller IDScreening your calls Reviewing Caller ID name/numbers Calling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. Use Deleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbers Headset installation Additional informationChanging the digital security code Headset Jack Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclip Maintenance Battery replacement and handlingWhen slightly dirty When very dirty Troubleshooting Symptom Suggestion Specifications GeneralBase unit Handset Index W, X, Y, Z