Step, Preparing the battery pack | Uniden EXI 7926 instruction

Step 3

Preparing the battery pack

Charge the battery pack for more than 12-15 hours before you start using your phone.

1 Press and slide the battery compart- ment cover toward the bottom of the unit.

2 Connect the battery pack connector. The plug will fit only one way. Then insert the battery pack into the battery compartment.

Black

Red	3 Securely close the battery compart-
	ment cover by sliding it up until it
	snaps into place.

4 Place the handset on the base unit with the keys and display facing upward.

When the handset has been properly placed on the charging terminals of the base unit, the "status" LED of the base unit lights and charging begins. Charge the battery for at least 12-15 hours.

You can place either side up for charg- ing the battery.

status LED

11

Image 11

Uniden EXI 7926 manual Step, Preparing the battery pack

Contents

Page Introduction Features Line2 Controls and functions 39 40 41 42 43 Table of contents 11 to Read this first Step Checking the package contents Choose the best location Setting up the base unit Connect the base unit Used only when second line If you arent sure of your dialing system Choose the dialing modeIf your dialing system is Set the switch to Preparing the battery pack Do not use any liquids or solvents Battery use time per chargeWhen the battery charge becomes low Cleaning the battery contacts Setting up Caller ID options To select Entering your area code Handset On Base Handset Off Base Base Only Auto Talk off BasicsMaking and receiving calls Basic 2-line operation Answering a call from the handset Answering a call from the base Off-hook dialing Using the tone featureMaking a call from the base Making a call from the handset Base Flash and Call WaitingLast number redial Handset Placing a call on hold Using the speakerphone mute feature Selecting a different channel Using the page featureAdjusting the volume controls Traveling out-of-range Line operation Line featuresBase ringer volume Base speaker volume Way conferencing Conference Line 1 Line Paging from the handset to base Using your EXI 7926 intercomPaging from the base to handset Transferring calls Using the speakerphone On the handset Memory featuresStoring a phone number in memory On the base Editing a phone number in memory Press delete/flash to remove any unwanted From the handset Erasing a number from memory From the base At the base Using memory dialing Reviewing Caller ID name/numbers Caller ID featuresUsing Caller ID Screening your calls Calling a Caller ID name/number Select Location screen appears. Use Storing a Caller ID number in a memory location Deleting a Caller ID message Deleting all Caller ID name/numbers Using Cidcw Caller ID with Call Waiting Headset Jack Headset installationAdditional information Changing the digital security code Standard wall plate mounting Mounting the base unit on a wall Direct wall plate mounting To attach the beltclip To remove the beltclip Installing the beltclip When very dirty MaintenanceBattery replacement and handling When slightly dirty Symptom Suggestion Troubleshooting Handset SpecificationsGeneral Base unit W, X, Y, Z Index