Basics (continued)
Making a call from the base
1 Press line 1 . |
2 Dial the number on the keypad, or, use one of the memory features. (See Using memory dialing, page 32.)
3 When you finish the call, press line 1 to hang up.
line 1 | line 2 |
| conference |
mute hold
status
Making a call from the handset
Off-hook dialing
1 | Pick up the handset. | line1 | line2 |
2 |
|
| mem |
Press line 1 . |
|
| |
3 | Dial the number on the keypad. Or use |
|
|
| one of the memory features. (See Using |
| |
| memory dialing, page 32.) |
|
|
4 | When you finish the call, press line 1 | or, return the handset to the base. |
On-hook dialing
To call a number while the handset is in standby mode, dial the number on the keypad, or use one of the memory features. Press line 1 . (See Using memory dialing, page 32.)
Hint | AutoStandby automatically hangs up when you place the handset on the |
| base. These is no need to press line 1 or line 2 to hang up. |
Note If a line is in use, or a phone off the hook, the LCD screen reads “In Use Line 1”.
Using the tone feature
If you are dialing in the pulse mode and need to enter tone digits, press * /0/tone then enter the digits. Once the call has ended, tone mode is canceled and pulse dialing resumes.
tone
0oper
call id dn | up delete |
Note The tone feature applies only when the base is set to pulse.
17