Erasing a number from memory, From the handset | Uniden EXI 7926

Memory features (continued)

Erasing a number from memory

After erasing a number, you may add a new address to memory.

From the handset

1

2

Pick up the handset from the base.

Press and hold mem	for two seconds.
The handset shows the “Memory		Store” screen with saved name/numbers
displayed.
line1	line2		Memory Store
	mem		Memory Store
		01	JOHN SMITH
		02	UNIDEN

3	Use the ¥up/int'com		and	dn »/conf keys,
	or number keypad, to select the memory
	location you would like to delete.
	The * /0/tone	and	#/ 1	keys toggle
	between the name display and the number
	display.
4	Press sel/vol	. The following screen appears:
		sel/vol	chan	redial/p
5	Use the dn »/conf key to move the

1cursor to “Delete Memory”.

6	Press sel/vol .
7	Use the ¥up/int'com key to move the

1cursor to “Yes”.

tone

0oper

call id dn

up delete

hold conf int'com flash

Edit Memory01

Delete Memory01

Go Back

Edit Memory01

Delete Memory01

Go Back

Delete Memory01?

Yes

No

continued next page

Notes • If you select “Go Back” at any time, no changes are made and the handset shows the “Memory Store” screen.

•If you select “No”, no changes are made. The handset shows the “Memory Store” screen.

30

Image 30

Uniden EXI 7926 manual Erasing a number from memory, From the handset

Contents

Page Features Introduction Controls and functions Line2 39 40 41 42 43 Table of contents Read this first 11 to Checking the package contents Step Setting up the base unit Choose the best location Used only when second line Connect the base unit Choose the dialing mode If your dialing system is Set the switch toIf you arent sure of your dialing system Preparing the battery pack Cleaning the battery contacts Battery use time per chargeWhen the battery charge becomes low Do not use any liquids or solvents Setting up Caller ID options Entering your area code To select Basic 2-line operation BasicsMaking and receiving calls Handset On Base Handset Off Base Base Only Auto Talk off Answering a call from the base Answering a call from the handset Making a call from the handset Using the tone featureMaking a call from the base Off-hook dialing Handset Flash and Call WaitingLast number redial Base Using the speakerphone mute feature Placing a call on hold Traveling out-of-range Using the page featureAdjusting the volume controls Selecting a different channel Base speaker volume Line featuresBase ringer volume Line operation Way conferencing Conference Line 1 Line Using your EXI 7926 intercom Paging from the base to handsetPaging from the handset to base Using the speakerphone Transferring calls Memory features Storing a phone number in memoryOn the handset On the base Editing a phone number in memory Press delete/flash to remove any unwanted Erasing a number from memory From the handset From the base Using memory dialing At the base Screening your calls Caller ID featuresUsing Caller ID Reviewing Caller ID name/numbers Calling a Caller ID name/number Storing a Caller ID number in a memory location Select Location screen appears. Use Deleting a Caller ID message Using Cidcw Caller ID with Call Waiting Deleting all Caller ID name/numbers Changing the digital security code Headset installationAdditional information Headset Jack Mounting the base unit on a wall Standard wall plate mounting Direct wall plate mounting Installing the beltclip To attach the beltclip To remove the beltclip When slightly dirty MaintenanceBattery replacement and handling When very dirty Troubleshooting Symptom Suggestion Base unit SpecificationsGeneral Handset Index W, X, Y, Z