Basics (continued)
Placing a call on hold
Use either the keypad on the handset or the keypad on the base.
1
2
To place line 1 on hold at the base, press hold . The line 1 LED turns from green
to red.
To place line 1 on hold at the handset, press call id/hold .
line 1 | line 2 |
conference | |
mute | hold |
call id dn | up delete |
hold conf int'com flash
The following screen appears: | |
3 To pick up the call that is holding, press | (Hold) |
Line 1 | |
line 1 on the base or handset. |
|
Note Do not use the base and the handset keypads at the same time to place a call on hold.
Using the speakerphone mute feature
Your EXI 7926 allows you to mute your conversation from the base. This prevents the party you are speaking to from hearing what you, or someone else in the room, is saying.
For example, to use this privacy feature while using line 1.
1 Press mute . The line 1 LED flashes red.
•You can hear the party on line 1, but they cannot hear you.
line 1 | line 2 |
| conference |
mute hold
2 When you are ready to continue your conversation with the party on line 1, press
mute again. The line 1 LED changes to green.
line 1 | line 2 |
| conference |
mute hold
Note • If a line is in use, or a phone off the hook, the LCD screen reads “In Use Line 1 (or Line 2)”.
19
