Infrared Modem User’s Manual
Page 11 of 41
Revision 1.0
2003/11 From 3JTech
3. Type in "user’s name", "user’s password", and "phone number" using
the onscreen keyboard.
4. Next to CONNECTION choose IR Modem.
Turn on the IR modem by switching the switch to IR (located at the rear of
the modem). If your battery is not charged you may have to connect the AC
power adapter.
Point your Palm’s IR port to the Modem IR port and tap on "connect".
Note: you can connect up to 1.5 meters away at a 15-degree angle.
NOTE:
1. Make sure to use the cable for Palm Pilot when your Palm Organiser is Palm
Pilot Personal***, Palm Pilot Professional***, Palm III, Palm IIIx, Palm IIIc,
IBM Workpad 30X, TGRPro.
2. Make sure to use the cable for Palm V if your Palm OS Organiser is Palm V,
Palm Vx, IBM Workpad C3 PC Companion (2Mb) and IBM Workpad C3 PC
(8Mb).
* Make sure you have upgraded the memory card. TRG SuperPilot Memory
Board II XL or Palm III 2MB Upgrade Kit, and be sure to upgrade to OS 3.3
or above.
** Please download the latest version from Palm’s official website.
http://www.palm.com/