ACTiSYS PP2-5600 For Connecting Psion using IrDA Port, This section uses Psion 618C as an example

Infrared Modem User’s Manual

For Connecting PSION using IrDA Port

This section uses PSION 618C as an example.

This installation guide is intended to help PSION users install the PP2I modem. After following the procedures in this manual, the installation of the PP2I modem should be complete and functional.

1.Connect the power and telephone line to your PP2I modem.

2.Turn on your PP2I modem.

3.On your PSION, go to System Æ Control Panel Æ Modem and setup your modem. The screen below should show:

Select Generic modem settings and click OK.

4.Then, as shown below:

Under Modem Options, enter the name of the modem: PSION IrDA Modem,

speed: 57,600 baud, connect via: IrDA, and under fax class, select Auto. Then, under Modem Advanced as shown on the next page, enter Flow control:”None”, Terminal detect (DSR/DTR): (un-checked), Carrier detect (DCD): (un-checked), and Modem type: Fixed Line, and click OK.

2003/11 From 3JTech Revision 1.0 Page 18 of 41