Infrared Modem User’s Manual

“(Infrared COM port or dongle)”, and then in “Infrared Devices” Select “(Generic Infrared Serial Port or dongle)”.

Click on “OK”.

6.At “Infrared Transceiver”, Select “ACTiSYS IR-220L or ACTiSYS IR-200L”. For ACT-IR-210L, Select “Generic Infrared Port” instead. Then click on “Next”.

7.Select the COM port to which the Infrared device is physically connected. In most cases, choose COM2. Click on “Next”.

8.Follow the screen prompts until it asks you what default ports to use. Select “Use default ports (recommended)”. Click on “Next”.

9. Click on “Finish”, The driver is installed

2003/11 From 3JTech

Revision 1.0

Page 38 of 41

Page 38
Image 38
ACTiSYS PP2-5600 user manual Infrared Modem User’s Manual