Troubleshooting
|
| Problem | Possible Solution | |||
|
|
|
|
| • Relocate the display unit and/or the | |
|
|
|
|
| The units must be within 330 ft (100 m) of each other. | |
|
|
|
|
| • Make sure both units are placed at least 3 feet | |
|
|
|
|
| (.9 m) away from electronics that may interfere with | |
|
|
|
|
| the wireless communication (such as TVs, microwaves, | |
|
|
|
|
| computers, etc). | |
|
|
|
|
| • Use standard alkaline batteries (or lithium batteries in | |
No outdoor sensor | sensor when temperature is below | |||||
use heavy duty or rechargeable batteries. NOTE: It | ||||||
|
| reception | ||||
|
| may take up to 20 minutes for display unit and sensor | ||||
|
|
|
| no bars | to synchronize after batteries are replaced. | |
|
|
| ||||
|
| |||||
| ||||||
|
|
|
|
| • Synchronize the units: | |
|
|
|
|
| 1. Bring both the sensor and display unit indoors and | |
|
|
|
|
| remove power adapter/batteries from each. | |
|
|
|
|
| 2. Reinstall batteries in outdoor sensor. | |
|
|
|
|
| 3. Reinstall power adapter/batteries in display unit. | |
|
|
|
|
| 4. Let the units sit within a couple feet of each other | |
|
|
|
|
| for about 20 minutes to gain a strong connection. | |
|
|
|
|
|
| |
|
|
|
|
| Flashing of the outdoor temperature may be an | |
|
| Outdoor | indication of wireless interference. | |||
|
| • Make sure the | ||||
temperature | ||||||
is flashing or | compartments of both the display unit and sensor are | |||||
switched to the same letter. You may choose A, B or | ||||||
showing dashes | ||||||
C; but both units must match to sync up. Sometimes | ||||||
|
|
|
|
| changing to a different channel can help. | |
|
|
|
|
|
| |
Weather Ticker | • Slow down the speed of the ticker (see page 16). | |||||
Hard to Read | ||||||
| ||||||
|
|
|
|
|
| |
|
|
|
|
| • Weather Forecast icon predicts conditions for the next | |
|
|
|
|
| 12 to 24 hours, not current conditions. | |
|
|
|
|
| • Has Learning Mode icon disappeared from the | |
|
|
|
|
| display unit? Learning Mode must complete before | |
Inaccurate forecast | forecast and pressure will be accurate. | |||||
• Allow unit to run continuously for 33 days. Battery | ||||||
|
|
|
|
| ||
|
|
|
|
| removal or resetting the display unit will restart | |
|
|
|
|
| Learning Mode. After 14 days, forecast should be | |
|
|
|
|
| fairly accurate, however Learning Mode calibrates for | |
|
|
|
|
| a total of 33 days. | |
|
|
|
|
|
| |
20
