Installations require both a vent/flue pipe and a combustion air intake pipe. Refer to the appropriate section for details concerning piping size, length, number of elbows, furnace connections, and terminations.

DIRECT VENT (DUAL PIPE) PIPING ­ BECKETT NX

NON-DIRECT VENT (DUAL PIPE) INTERburner

Installations require both a combustion air intake and a ventlflue pipe. The pipes may be run horizontally and exit through the side of the building or run vertically and exit through the roof of the building.

The pipes may be run through an existing unused chimney; however, they must extend a minimum of 12 inches above the top of the chimney.

The space between the pipes and the chimney must be closed with a weather tight, corrosion resistant flashing. Both the combustion air intake and vent/fJue pipe terminations must be in the same atmospheric pressure zone.

Refer to Section VI, Vent/flue and Combustion air Pipe - Termination Locations or Concentric Vent Termination for specific details on termination construction.

For details concerning connection of pipes to the furnace, refer to the Section VI, Vent/Flue Pipe and Combustion Pipe - Standard Furnace connections or alternate furnace connections.

ROOF VENT SYSTEM

The vent termination of vent pipe run vertically through a roof must terminate at least 12 inches above the roof line (or the anticipated snow level) and be at least 12 inches from any vertical wall (inclUding any anticipated snow build up).

Vertical Tenninations (Dual Pipe)

Horizontal terminations should be as shown in the following figure. Refer to Section VI, Vent/Flue Pipe and Combustion Pipe­ Termination Location for location restrictions.

A 3 ~ inch diameter hole is required for 3" diameter pipe. To secure the pipe passing through the wall and prohibit damage to piping connections, a coupling should be installed on either side of the wall and solvent cemented to a pipe connecting the two couplings.

The pipe length should be the wall thickness plus the depth of the socket fittings to be installed on the inside and outside of the wall. The wall penetration should be sealed with silicone caulking material.

Standard horizontal Terminations (Dual Pipe)

Alternate Horizontal Vent Tennination (Dual Pipe)

11

Page 11 Page 13
Page 12
Image 12
Adams Condensing Oil-Fired Furnace Direct Vent Dual Pipe Piping ­ Beckett NX, NON-DIRECT Vent Dual Pipe INTERburner
Page 11 Page 13

Condensing Oil-Fired Furnace specifications

The Adams Condensing Oil-Fired Furnace is a leading choice for homeowners seeking an efficient and reliable heating solution. Known for its advanced technology and outstanding performance, this furnace is designed to provide comfort during the coldest months while maximizing energy efficiency.

One of the main features of the Adams Condensing Oil-Fired Furnace is its high-efficiency heating capabilities. Equipped with a condensing heat exchanger, it utilizes combustion gases that would otherwise be wasted. This allows the furnace to achieve efficiency ratings of up to 90 percent or higher, making it one of the most efficient options on the market. This not only reduces energy consumption but also lowers heating costs for homeowners.

The furnace is designed with a robust construction that ensures durability and longevity. The unit is made from high-quality materials resistant to corrosion and wear. This is particularly important in environments where the furnace may be exposed to fluctuating temperatures and humidity levels. The furnace also has advanced insulation, minimizing heat loss and further enhancing its efficiency.

Another significant characteristic of the Adams Condensing Oil-Fired Furnace is its quiet operation. The unit is engineered with sound-absorbing materials and an advanced blower design, allowing it to operate quietly. This feature is particularly desirable for those who value peace and tranquility in their homes.

The furnace employs advanced control technology that allows for precise temperature management. Homeowners can benefit from programmable thermostats that enable them to customize heating schedules to suit their lifestyle. This not only ensures comfort but also promotes energy savings by allowing the system to operate only when needed.

In addition to its efficiency and performance, the Adams Condensing Oil-Fired Furnace is designed with safety in mind. The unit incorporates a range of safety features, including flame sensors and automatic shut-off systems that provide peace of mind for users.

Overall, the Adams Condensing Oil-Fired Furnace stands out as a premium heating solution, combining efficiency, reliability, and advanced features. With its commitment to energy savings and user comfort, this furnace is an excellent investment for any homeowner looking to enhance their heating system.
Top Page Image Contents