Connecting Your Device

Connecting Your Device

Follow these steps to connect your video device (VCR or camcorder) or TV source (cable, satellite receiver, antenna, and so on) to the AVC-2410.

Connecting a Video Device

Connect your video device to your AVC-2410 using the included A/V cable or the proprietary cable that came with your device. S-Video users can use an S-Video cable and the A/V cables included in the VideOh! kit.

See the Figure on page 4 if you need help locating the ports on your AVC-2410.

Now you’re ready to CREATE. See page 38 to create a video project.

Connecting a TV Source

Connect your TV source to your AVC-2410 using a standard TV cable.

Connect the Infrared cable to the cable port, then place the receiver in an open area on or near your computer monitor. Ensure that the Infrared signal from the remote control can reach the receiver.

Now you’re ready to CREATE. See page 34 to create a TV project.

20