Adaptec AVC-2410 Play, Save, Capture, Stop Capturing, Start Capturing

Creating A Video Project with MyDVD

3On the Main project window (shown in Step 2 on page 39), click Capture. The Capture window appears. The video image appears in the Capture window.

These buttons won’t operate your analog video device. Use the Play, Stop, and other control buttons on your device to control your analog video tape.

4Press the Play button on your analog video device.

5To begin transferring your video to your computer, click Start Capturing.

MyDVD captures your video, including the audio.

Note: If you get any error messages at this point in your video capturing, stop your analog video device and see Need Help Capturing Your Video? on page 50.

6When you want to stop transferring your video to your computer, click Stop Capturing, then stop or pause your analog video device.

7On the Save As screen, enter the filename of your video clip and click Save. The filename you choose becomes the title of your video clip and is displayed on the Main project window. (You can change the title later if you choose.)