LTPH-UM-1049-02, Issue 2 Provisioning
H2TU-C-319 List 4E January 9, 2002 33
Clearing the History, Alarm, and Event Log Screens
Select Master Clear to clear the History, Alarm and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures that you
have meaningful data thereafter.
Figure 14. Config Menu - Master Clear
To clear the Event Log, press to select the Event Log screen, then press to clear the screen.
To clear an individual history or alarm screen, do the following:
1Press to select the Performance screen.
2Press the to select an interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2, or
H2TU-R HDSL2), then press .
3Press the to select the type of statistics (Current, Alarm History, 25 Hour History,
48Hour History, or 31 Da y H istory), press after your selection.
–Selecting 31 Day History allows you to clear the Current, 25 Hour, 48 Hour, and 31 Day
performance history screens for the selected interface.
–Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 alarm screens, see Table17 on page 45.
4Press to clear the screen.
To clear all history, alarm, and event log screens:
1Press to select the Config screen.
2Use the and arrow keys to select Master Clear.
3Press to clear all screens.
Monitor Performance Event Log Config Inventory Report Rlogon Help
+-----------------------+
| Standard Options -> |
| ADC Options -> |
| Test Mode -> |
| Date and Time -> |
|Master Clear |
| Set Factory Defaults |
+-----------------------+
Clear ALL performance, alarm and event log entries. Are you sure (Y/N)?
ID: xxxx--xxxx--xxxx--xxxx 08/01/2001 06:38:12 H2TU-C System: OK
E L
P
SPACEBAR
ENTER
SPACEBAR
ENTER
L
C
↑ ↓
Y