![Chapter 4 Connection Configurations for Debug Console](/images/new-backgrounds/125091/12509129x1.webp)
EVB7400
Chapter 4 Connection Configurations for Debug Console
4.1Configuration the Hyper Terminal
To configure the Hyper Terminal, which is a Windows utility program for serial communications, refer to following steps:
1.Run the Hyper Terminal program
2.Select COM Port to communicate with EVB7400 board.
3.Set the serial port properties
4.Select the Properties from the File menu
[ Fi gu re 5 ] PROPERTIES SETTING PAGE
5.Choose Setting Page.
User’s Manual V.0.10 | 15/36 |
Copyright © 2004 MCS LOGIC Limited. All rights reserved