Adcom GTP-760 owner manual 27 5.1 Channel Inputs, AC Power Cord Receptacle export models

27 5.1 Channel Inputs

f r o n t r e a r s u b w o o f e r

c e n t e r

5 . 1 - c h a n n e l i n

These are the multichannel analog inputs. Connect your DVD- Audio, SACD or other multichannel source as follows:

1)Connect the source’s “front left” output to the white-centered RCA input marked “front”.

2)Connect the source’s “front right” output to the red-centered RCA input marked “front”.

3)Connect the source’s “surround left” output to the white-centered RCA input marked “rear”.

4)Connect the source’s “surround right” output to the red-centered RCA input marked “rear”.

5)Connect the source’s “center” output to the black-centered RCA input marked “center”.

6)Connect the source’s “subwoofer” output to the black-centered input marked “subwoofer”.

Note:The GTP-760 does not apply bass-management to the 5.1 channel analog inputs, and all six input channels will pass full range signals. Some multichannel sources may not make use of bass-management techniques. Please read the multichannel source’s manual carefully to ensure correct operation.

28 AC Fuse Holder **CAUTION** UNPLUG the unit before checking the fuse!

This holder provides easy access to the AC line fuse if that fuse needs replacement. To gain access to the fuse, insert a Phillips head screwdriver and turn counterclockwise. After replacing the fuse, reseat the holder by turning clockwise until the holder is firmly seated.

When replacing the fuse, ALWAYS use one of equal value (for domestic models use a F500mA, 250V fuse available at any electronic parts store.) NEVER use a fuse of higher value. If the fuse fails again, consult your ADCOM dealer or call the ADCOM Service Department directly.

AC Power Cord (115VAC models)

Make sure to seat this cord firmly in an unswitched wall socket to provide uninterrupted power to the GTP-760. When removing the cord from an AC socket, NEVER pull on the cord itself. Instead, grasp the plug firmly and remove it from the socket. You may need to “rock” the plug lightly for easier removal.

AC Power Cord Receptacle (export models)

This IEC-standard socket accepts a wide variety of AC power cords.

18