If you have chosen to use a mix of both Composite and S-Videosources, the VIDEO field of the INPUT SETTINGS menu is the place to set the mode. In the example from section 1.2, a composite VCR and an S- Video DVD are to be used. Select the VCR input of the GTP-760. The VIDEO field should show COMPOSITE. Now select the GTP-760 input where the DVD player is connected (DVD, digital 1 or digital 2). Highlight the VIDEO field and press either the < or > remote button. The on screen display disappears from your television. Without altering anything else on the GTP-760, change your television to its S-Video input (consult your televi- sion owner’s manual for directions). The GTP-760 on screen display should reappear, this time with a light gray background. The VIDEO field will now say S-VIDEO. Repeat this procedure for each individual input you wish to change.
The LEVELS MENU selection is not a field but another menu. Highlight LEVELS MENU with the> or >remote buttons and press select/play. You will see the following screen:
LEVELS MENU | |
FRONTS | - | + |
CENTER | - | + |
REARS | - | + |
SUB | - | + |
UNDO CHANGES
DONE
The menu shows levels for FRONT, CENTER, REARS and SUB. The bars for each item should be equally centered at this time. Inactive channels show not available, N/A.
The immediate question you might ask, “Why are we looking at channel trims again when we have already set this?” There is an important distinction to be made between the LEVELS MENU screen and the menus you used to setup the system. The previous screens were used to balance the system due to system and room parameters. These things do not often change and therefore should not be changed in the GTP-760. However, while playing different movies or music, you may find that fine adjustments are necessary. Perhaps the subwoofer on one soundtrack is too quiet while another has loud rear channels. The LEVELS MENU screen allows level adjustments to be made WITHOUT effecting the system settings that have been carefully entered. Using the < and > buttons on the remote OR using the sub, rear and center up and down buttons on the remote changes the displayed settings on the LEVELS MENU screen (the sub, center and rear remote buttons do not effect the CHANNEL BALANCE setup screen). In this way, you are free to adjust level trims “on the fly” for different soundtracks. If you want to return to your carefully balanced system setup, simply set the bars for each field on the LEVELS SETTING screen back to the center/equal positions. If you have not changed the CHANNEL BALANCE menu levels or used the noise sequencer since initial setup, then you have returned to your default setting and can leave the sound meter in the closet.
4.0BASIC OPERATION
4.1Operating Mode Selection
The GTP-760 features several operating modes - DTS, Dolby Digital, Dolby Pro Logic, 5 channel stereo, several “enhancement” modes, etc. - designed to present music and movie soundtracks as realistically as possible. In addition, some of these modes add the ability to “custom tailor” the GTP- 760’s spatial presentation to better suit individual tastes.
You’ll need to understand these modes - DTS, Dolby Digital, Cinema, Dolby Pro Logic, Symphony Hall, Stadium, Jazz Club, 5-channel stereo, 2-channel stereo - to get the most out of your GTP-760.
At first, selecting the proper mode can be confusing, particularly when increasingly popular digital formats like DVD present an often-bewildering array of soundtrack options. For this reason, the GTP-760 features automatic mode selection (or “Auto Select”) to analyze digital input signals and process them properly. (Auto Select works only with digital input signals).
