Adcom GTP-760 40Down arrow/Stop, 41Select/Play, 43Shift, 44FM/AM, 45Stereo, 47Enter, 49dialog

40Down arrow/Stop

•In main mode, this is preprogrammed to scroll down to the next choice on a menu screen.

•In CD mode, it is preprogrammed to stop an ADCOM CD player.

•In tuner mode, it is preprogrammed to start scanning preset frequencies lower than the current station.

•The button is programmable for use with any other source.

41Select/Play

•In main mode, this is preprogrammed to enter a selection chosen via the menu system.

•In CD mode, it is preprogrammed to start an ADCOM CD player.

•The button is programmable for use with any other source.

42Direct Access Keypad (buttons “1” through “10,” and “+10”)

•In Tuner mode, buttons “1” through “7” are preprogrammed to access preset stations.

•In CD mode, buttons are preprogrammed as track access commands for the ADCOM CD player.

•The buttons are programmable for use with any other source.

43Shift

•In Tuner mode, button is preprogrammed to access presets 8 through 14 (“Shift” + “2” = preset number 9, etc.)

•In CD mode, button is preprogrammed as “call” command for ADCOM CD player.

•The button is programmable for use with any other source.

44FM/AM

•In Tuner mode, button is preprogrammed to switch between FM and AM bands.

•In CD mode, button is preprogrammed as “repeat” command for ADCOM CD player.

•The button is programmable for use with any other source.

45Stereo

•In Tuner mode, button will change playback from Stereo to Mono.

•In CD mode, button is preprogrammed as “program/memory” command for ADCOM CD player.

•The button is programmable for use with any other source.

•In main it will switch to 2 channel.

46Srnd (surround)

•In main mode, button is preprogrammed to step through GTP-760’s various operation modes.

•In CD mode, button is preprogrammed to initiate random play with ADCOM CD player.

•The button is programmable for use with any other source.

47Enter

•In tuner mode, button is preprogrammed to select “manual” or “seek” tuning modes.

•In CD mode, button is preprogrammed as “time” command for ADCOM CD player.

•The button is programmable for use with any other source.

48d. (dynamic) range

•In main mode, button is preprogrammed to adjust dynamic range of Dolby Digital encoded sources.

•In CD mode, button is preprogrammed to access disc 1 with ADCOM CD player.

•The button is programmable for use with any other source.

49dialog

•In main mode, button is preprogrammed to call up or cancel “dialog enhance” equalization.

•In CD mode, button is preprogrammed to begin and end “A-B” repeat with ADCOM CD player.

•The button is programmable for use with any other source.

22