Admiral AAW-08CR1FHU Control Panel, Operating Instructions, Button, Mode button, Fan Speed button

WAC 5 6 8 USER MAN final 3/2/05 12:23 PM Page 14

OPERATING INSTRUCTIONS

➤CONTROL PANEL

You can easily operate this air conditioner by pressing relevant

button on the control panel as well as the remote control.		Control Panel
	Button
The air conditioner will be started when it is energized or will
be stopped when it is in operation, if you press this button.
When the air conditioner is heating, allow 3 minutes after you
press this button.
Mode button

Each time Mode button is pressed, the operation mode is changed in sequence:

5K 6K 8K cooling only COOLING FAN ONLY ENERGY SAVING COOLING

8K with heater COOLING FAN ONLY HEATING ENERGY SAVING COOLING

NOTE: Aftert r settingsettingthethemode,mode,allowallow3 threeminutes(3) beforeminutesswitchingbefore

switching to another mode. In the FAN ONLY Mode, Room to another mode.

Temperature display range is from 0°C (32°F) to 38°C (99°F).
In the FAN ONLY Mode , Room Temperature display range is
Room Temperature below 32°F, the Temperature display L0.
from 0 (32 ) to 38 (99 ).
Room Temperature above 99°F, the Temperature display H1.
Room Temperature below 32	,the Temperature display L0.
Room Temperature above 99	,the Temperature display H1.

Fan

Timer Speed

Mode

Airconditioner

Fan Speed button

Used to select fan speed in sequence auto, low, medium and high (low and medium are in same fan speed).

Timer button

Used to set or cancel timer operation.

When the unit is in operation, you can set OFF TIMER. When the unit is off, you can set ON TIMER.

Timer setting range is 0 to 24 hours.

If the OFF TIMER is set, the time LED displays the

If the OFF TIMER is set, the timer LED displays the

reremainingai i timeti e tototurnturnoffoffthetheunitunitforforonlyonly1212seconds,seconds, thenthenLEDLED shiftsi ts toto displaydisplay ssett tetemperatureer re. If you press

TIMER button within the 12 seconds, OFF TIMER will be TIMER button within the 12 seconds, OFF TIMER will be canceledcancelled..

If the ON TIMER is set, the timer LED displays the

If the ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel remaining time to turn on the unit. If you want to cancel ON TIMER, press TIMER button.

ON TIMER, press TIMER button.

Indication symbols of LED on control panel :

Auto fan speed	Cooling
		F
Low fan speed	Fan only	h
		Display set temp
Medium fan speed	Heating	Display set timer
High fan speed	Energy-saving
	Timer

Above LED lights on when the relevant mode is in use.

Button

Used to set room temperature in COOLING mode or used to set time in TIMER mode. Used to set room temperature in COOLING mode or used to set time in TIMER mode.

IfIfthethetwotwokeyskeysarearepressedpressedatatthethesamesametime,time,thethetemperaturetemperatureLEDLEDdisplaydisplaywill willalternatealternateb tweenbetweenand°C and. °F.

NOTE:NOTE:TemperatureTemperaturesettingsettingrangerangeis fromis from19 19°C(66 (66°F)) to 31to 31°C(88 (88°F)). .

12