Advantech HMI-640S user manual Installing a PC/104 Module

2.5 Installing a PC/104 Module

The HMI-640S's PC/104 connector gives you the flexibility to attach to the PC/104 expansion modules, which perform same functions as traditional plug-in expansion cards. Using these modules might save you space and valuable slots.

To install a PC/104 module:

1.Verify that the power source to the HMI-640S has been properly disconnected.

2.Detach the metal cover on the rear panel.

3. Plug the PC/104 module's male connectors into ISA expansion slot's female connectors by pressing the module firmly with caution.

4. Secure the two PC/104 modules onto the HMI-640S.

Chapter 2 System Setup 1 7