Advantech HMI-640S user manual Installing a 2.5 HDD

Installing a 2.5" HDD

HMI-640S is designed as a HDD-less platform of a high reliability. However, if a HDD should be used, its installation procedure is described as follows:

1.Verify that the power source to the HMI-640S has been properly disconnected.

2.Connect the HDD via a cable to the IDE-compatible slot on the HMI-640S. Make sure that you have inserted the cable connector properly into the slot.

Warning! When connecting the cable to the HDD, make sure

that pin 1 on the cable is connected to pin 1 on the

connector of the HDD. Faulty or wrong connection might damage your HDD.

Chapter 2 System Setup 1 5