3.5 I/O Adapter (CPC-2900)

To replace or service the I/O adapter, follow these steps:

1.Verify that the power source to the HMI-640S has been disconnect- ed.

2.Remove the rear cover. (See Section 3.1.)

3.Remove the screw which attaches the I/O adapter to the Carrier Board.

4.Replace the I/O adapter and reassemble the HMI-640S.

Chapter 3 Maintenance

2 7

Page 37
Image 37
Advantech HMI-640S user manual I/O Adapter CPC-2900