PCM-9587 User Manual 40
7.1 Introduction
The PCM-9587 is equipped with a high-performance 32-bit Ethernet chipset which is
fully compliant with IEEE 802.3 100 Mbps CSMA/CD standards. It is supported by
major network operating systems. It is also both 100Base-T and 10Base-T compati-
ble.
7.2 Features
Intel® 82551ER 10/100Base-T Ethernet LAN controller
Supports Wake-on-LAN remote control function.(Only support via Intel®
82551QM)
PCI Bus Master complies with PCI Rev. 2.2
Complies with 100Base-TX, and 10Base-T applications.
Single RJ-45 connector gives auto-detection of 10 Mbps or 100 Mbps network
data transfer rates and connected cable types.
Enhancements on ACPI & APM.
Complies with PCI Bus Power Management Interface Rev. 1.1,
ACPI Rev. 2.0, and Device Class Power Management Rev. 1.0.
7.3 Installation of Ethernet Driver
Before installing the Ethernet driver, note the procedures below. You must know
which operating system you are using in your PCM-9587, and then refer to the corre-
sponding installation procedure. Then just follow the steps described. You will quickly
and successfully complete the installation, even if you are not familiar with instruc-
tions for Windows.

7.3.1 Installation for Windows 2000

1. a.Select "Start", "Settings". "Control Panel".
b. Double click "Network".
Note! The windows illustrations in this chapter are examples only. You must
follow the flow chart instructions and pay attention to the instructions
which then appear on your screen.