AEG 10000, 6000 Behaviour when switching off:

Please shut down the entire system if you cannot i solve any problems which occur. Press the OFF button for about 2 seconds. Disconnect the UPS from the mains by pressing the mains input circuit breaker (Pos 3, page 26). Please contact our

hotline (page 5).

8.When all displays are lit as described, switch on your loads one after the other. Note the maximum permitted UPS load when doing this.

i	Behaviour when switching off:
	The behaviour after switching off the UPS with the
	mains switch (OFF) can be defined with the
	Software CompuWatch. The UPS can switch to
	bypass mode or can be switched of right away.

35