AEG 80800 manual Setting or Changing the Start Delay Timer, Load Sensing - Sensor Logic

Operating Instructions

Setting or Changing the Start Delay Timer

Using the start delay timer you can adjust when the wash programme is to begin within the next 19 hours.

Setting the start delay timer:

0 1. Press the ON/OFF button (AAN/UIT; MARCHE/ARRET).

2.Keep pressing the DELAY TIMER button (STARTTUIDKREUZE; DEPART DIFFERE) until the number of hours of delay until the wash programme is to start are flashing on the multi-display.

3.Press the button for the desired wash programme. The multi-display now displays the number of hours without flashing. The number of hours is saved.

4.The wash programme starts automatically at the end of the delay set.

Changing the start delay:

As long as the wash programme has not started, you can still change the start delay set by pressing the DELAY TIMER button (STARTTUID-

KREUZE; DEPART DIFFERE).

Load Sensing – Sensor Logic

If a wash programme is started even though there are only a few dishes in the upper and/or lower rack, an intelligent electronic system adjusts the amount of water and the duration of the wash programme to the number of dishes. By this means it is possible to wash only a few dishes quickly and economically. At half load (6 place settings), up to 2 litres of water and 0.2 kWh of electricity are saved.

28