Installation and Connection Instructions

 

Leak Prevention System

 

For protection from damage due to water leaks, the dishwasher is

 

equipped with a leak prevention system, the AQUA CONTROL SYSTEM.

 

In the event of a fault, the safety valve immediately interrupts the sup-

 

ply of water to the appliance and the drain pump switches on. It is thus

 

not possible for water to either leak or overflow. Any water left in the

 

appliance is automatically pumped out.

1

The AQUA CONTROL SYSTEM also works when the appliance is switched

 

off – the appliance must however not be disconnected from the mains.

When the appliance is switched on, a buzzing tone can also be heard.

Electrical connection

1

In compliance with electric company technical requirements for mains

 

connections, hard-wired connections to the mains may only be made

by approved electri-cians.

When connecting the appliance, observe the German VDE regulations and, if applicable, any additional conditions required by your local elec- tricity supplier. Following installation, live parts and live insulated wir- ing must not be accessible using a finger test in accordance with EN 60335/DIN VDE 0700.

Information on the electrical connection can be found on the rating plate on the right side of the inner edge of the dishwasher door. If the appliance has a change-over switch, the additional instructions on the change-over diagram in the mains connector box must be observed.

Prior to connecting ensure that the mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate. The required fuse protection is also to be found on the rating plate.

To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.

If the appliance is hard-wired to the mains supply, then it must be safely isolated from the mains within the electrical installation with switches intended to ensure all-pole(N,L1)disconnection, shall be directly connected to the supply terminals and shall have a contact separation (fuses, cut outs, current trips or similar) of at least 3mm in each pole.

41

Page 41
Image 41
AEG 80800 manual Leak Prevention System, Electrical connection, Appliance is automatically pumped out

80800 specifications

The AEG 80800 is a versatile and innovative appliance designed to enhance the convenience and efficiency of home cooking. This product has been meticulously engineered to cater to the needs of modern households, offering a range of features that streamline meal preparation.

One of the standout characteristics of the AEG 80800 is its powerful performance. It often integrates high-efficiency cooking technologies that ensure even heat distribution, leading to perfectly cooked meals every time. The appliance is equipped with an advanced heating element that significantly reduces cooking times, allowing users to save time in the kitchen without compromising on culinary quality.

The user interface of the AEG 80800 is designed with simplicity in mind. It typically features an intuitive digital display that makes it easy to select and monitor cooking settings. The interface allows users to adjust temperature and cooking time with precision, providing control over the cooking process. Many models also offer a variety of pre-set cooking programs, catering to different dishes and cooking styles.

Safety is a priority in the design of the AEG 80800. This appliance often includes features such as an automatic shut-off function, overheating protection, and thermal insulation, ensuring that it operates safely during use. These elements not only enhance user confidence but also contribute to the longevity of the product.

Energy efficiency is another key highlight of the AEG 80800. As energy consumption becomes a more significant concern for many households, this appliance is built to consume minimal electricity while delivering maximum output. This not only helps to reduce utility bills but also aligns with eco-friendly practices.

In terms of design, the AEG 80800 typically boasts a sleek and modern appearance, making it an attractive addition to any kitchen decor. Its compact size ensures that it fits well in smaller spaces while still offering ample cooking capacity. The materials used in its construction are often high-quality and easy to clean, promoting hassle-free maintenance.

In summary, the AEG 80800 is a standout appliance that embodies efficiency, safety, and modern design. Its advanced cooking technologies, user-friendly interface, and energy-saving capabilities make it an excellent choice for anyone looking to upgrade their kitchen appliances. With its reliable performance and stylish aesthetics, the AEG 80800 is sure to meet the demands of contemporary cooking while enhancing the overall culinary experience.